Eibach Pro-Spacer

Eibach Pro-Spacer

The delivery time will be sent via e-mail
Code
90-4-25-071
Weight
2.00 Kg

Description

Eibach, Pro-Spacer, System 4/8; Disc with screw system; With centering collar (centerin nose); Track change from 30 to 60 mm (disc thickness from 15 to 30 mm); Fastening: a) disc at wheel carrier: by using special-fixing nut b) wheel at disc: by using production (or accessory) nut; Delivery with attachment parts; System 8: without centering collar (centering nose)

Kit for one axle
€ 116.62
VAT included.


Supported models

Brand Model Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit Note
Outlander III (GG_W - GF_W - ZJ) 8.12> 114,3/5 67.1 67.1 M12x1,5 S9

S9   When using wheelspacers xou have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without this cut-outs it is not possible to use the wheels or wheelspacers! Please check as follow: Dtud lengh (e.g. 25mm) minus spacerthickness (e.g. 15mm) = 10 mm exses lenght. So the cut out should have 11 mm depth to take the original stud. Further the cut-outshould have minimum 22 mm x 22 mm height/width to take theoverlaping nut. ATTENTION: when using 15 mm spacers at least 7 mmdeep cut-outs are needed as the nuts stand over the contact surface!

* TÜV Certificate





You may also like


Categories


Pro-Spacer
30 %
Eibach Pro-Spacer

Eibach Pro-Spacer

90-6-10-002

Weight: 4.00 kg;


Eibach, Pro-Spacer, System 6; Disc with a pass-through system; With centering collar (centering nose); Track change from 20 to 40 mm (disc thickness from 10 to 20 mm); Fastening by using longer knureld stud (to change at the automobile); Delivery with attachment parts (for standart wheels or wheels...

The delivery time will be sent via e-mail
Kit for one axle
€ 92.46
VAT included.
Request informations
Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit Note
10 114,3/5 67.1 M12x1,5 10 S33

S33   The original stud bolts must be changed. Longer stud bolts are enclosed in he kit. At some cars (e.g. Ford, kia, Volvo) it´s necessary to disasseble the wheeltrunk and/or the whell bearing. This only should be done by your garage.

* TÜV Certificate

Pro-Spacer
30 %
Eibach Pro-Spacer

Eibach Pro-Spacer

90-6-15-023

Weight: 4.00 kg;


Eibach, Pro-Spacer, System 6; Disc with a pass-through system; With centering collar (centering nose); Track change from 20 to 40 mm (disc thickness from 10 to 20 mm); Fastening by using longer knureld stud (to change at the automobile); Delivery with attachment parts (for standart wheels or wheels...

The delivery time will be sent via e-mail
Kit for one axle
€ 96.63
VAT included.
Request informations
Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit
15 114,3/5 67.1 M12x1,5 10

* TÜV Certificate

Pro-Spacer
30 %
Eibach Pro-Spacer
Sample photos

Eibach Pro-Spacer

90-4-15-033

Weight: 2.00 kg;


Eibach, Pro-Spacer, System 4/8; Disc with screw system; With centering collar (centerin nose); Track change from 30 to 60 mm (disc thickness from 15 to 30 mm); Fastening: a) disc at wheel carrier: by using special-fixing nut b) wheel at disc: by using production (or accessory) nut; Delivery with...

The delivery time will be sent via e-mail
Kit for one axle
€ 106.62
VAT included.
Request informations
Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit Note
15 114,3/5 67.1 M12x1,5 10 S9

S9   When using wheelspacers xou have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without this cut-outs it is not possible to use the wheels or wheelspacers! Please check as follow: Dtud lengh (e.g. 25mm) minus spacerthickness (e.g. 15mm) = 10 mm exses lenght. So the cut out should have 11 mm depth to take the original stud. Further the cut-outshould have minimum 22 mm x 22 mm height/width to take theoverlaping nut. ATTENTION: when using 15 mm spacers at least 7 mmdeep cut-outs are needed as the nuts stand over the contact surface!

* TÜV Certificate

Pro-Spacer
30 %
Eibach Pro-Spacer
Sample photos

Eibach Pro-Spacer

90-4-20-048

Weight: 2.00 kg;


Eibach, Pro-Spacer, System 4/8; Disc with screw system; With centering collar (centerin nose); Track change from 30 to 60 mm (disc thickness from 15 to 30 mm); Fastening: a) disc at wheel carrier: by using special-fixing nut b) wheel at disc: by using production (or accessory) nut; Delivery with...

The delivery time will be sent via e-mail
Kit for one axle
€ 112.46
VAT included.
Request informations
Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit Note
20 114,3/5 67.1 M12x1,5 10 S9

S9   When using wheelspacers xou have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without this cut-outs it is not possible to use the wheels or wheelspacers! Please check as follow: Dtud lengh (e.g. 25mm) minus spacerthickness (e.g. 15mm) = 10 mm exses lenght. So the cut out should have 11 mm depth to take the original stud. Further the cut-outshould have minimum 22 mm x 22 mm height/width to take theoverlaping nut. ATTENTION: when using 15 mm spacers at least 7 mmdeep cut-outs are needed as the nuts stand over the contact surface!

* TÜV Certificate

Pro-Spacer
30 %
Eibach Pro-Spacer

Eibach Pro-Spacer

90-4-30-037

Weight: 4.00 kg;


Eibach, Pro-Spacer, System 4/8; Disc with screw system; With centering collar (centerin nose); Track change from 30 to 60 mm (disc thickness from 15 to 30 mm); Fastening: a) disc at wheel carrier: by using special-fixing nut b) wheel at disc: by using production (or accessory) nut; Delivery with...

The delivery time will be sent via e-mail
Kit for one axle
€ 124.12
VAT included.
Request informations
Thickness Spacer Wheelbase Holes Centering diameter Border Qty. bolts kit Note
30 114,3/5 67.1 M12x1,5 10 S9

S9   When using wheelspacers xou have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without this cut-outs it is not possible to use the wheels or wheelspacers! Please check as follow: Dtud lengh (e.g. 25mm) minus spacerthickness (e.g. 15mm) = 10 mm exses lenght. So the cut out should have 11 mm depth to take the original stud. Further the cut-outshould have minimum 22 mm x 22 mm height/width to take theoverlaping nut. ATTENTION: when using 15 mm spacers at least 7 mmdeep cut-outs are needed as the nuts stand over the contact surface!

* TÜV Certificate

Partsoutlet24.com © 2014 – All rights reserved
Sta utilizzando una versione ormai obsoleta di Internet Explorer. Si consiglia di aggiornare il Browser per visualizzare correttamente il sito.