Engine Mount Insert

The delivery time will be sent via e-mail
Code
PFR68-120
Weight
0.15 Kg

Description

Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.


Units for car 1

PFR68-120   Position diagram 20

Supported models

Brand Model Version Note
ForTwo 451 (2007 - 2014) Classic line - rinforzati 40% 1993)

1993)   Fitting the new insert, PFR68-120 Engine Mount Insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses and wiring.A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.





You may also like


Categories


Powerflex Road Series
10 %
Front Wishbone Bush

Front Wishbone Bush

PFF68-101

Weight: 0.56 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF68-101   Position diagram 1

Shipping: 3-4 working days
each
€ 32.65
VAT included.
+
-
Buy
Powerflex Road Series
10 %
Front Anti Roll Bar Bush 18.5mm

Front Anti Roll Bar Bush 18.5mm

PFF68-104-18.5

Weight: 0.08 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF68-104-18.5   Position diagram 4

Shipping: 3-4 working days
each
€ 22.91
VAT included.
+
-
Buy
Powerflex Road Series
Rear Beam Mount Bush

Rear Beam Mount Bush

PFR68-130

Weight: 0.79 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

PFR68-130   Position diagram 30

Shipping: 3-4 working days
each
€ 50.06
VAT included.
+
-
Buy
Note
2149)

2149)   The OE rubber bush is only supplied as part of the rearaxle beam assembly making it extremely expensive to replace (300 plus labour) when it fails. We are nowmaking a two-piece voided bush PFR68-130 Rear Beam Mount Bush, offering a cost effective replacement solution that can be installed on site. With this one bush being the main mounting point for therear axle, its operation is vital for rear end control.

Partsoutlet24.com © 2014 – All rights reserved
Sta utilizzando una versione ormai obsoleta di Internet Explorer. Si consiglia di aggiornare il Browser per visualizzare correttamente il sito.