Front Radius Arm Rear Bush

The delivery time will be sent via e-mail
Code
PFF32-109
Weight
0.50 Kg

Description

Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.


Units for car 2

PFF32-109   Position diagram 9

Supported models

Brand Model Version Note
Defender (1984 - 1993) Classic line - rinforzati 40% 1413)
Defender (1994 - 2002) Classic line - rinforzati 40% 1413)
Defender (2002 - 2016) Classic line - rinforzati 40% 1413)
Discovery 1 (1989-1998) Classic line - rinforzati 40% 1413)
Range Rover Classic (1970 - 1985) Classic line - rinforzati 40% 1413)
Range Rover Classic (1986-1995) Classic line - rinforzati 40% 1413)

1413)   PFF32-109 replicates original steering geometry.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.To counter pull to the left or right, please use PFF32-109G05 for 0.5 degrees offset or PFF32-109G1 for 1 degree offset.





You may also like


Categories


Powerflex Road Series
Land Rover Defender 1994 - 2002, Discovery I 1989 - 1998, Range Rover Classic 1986 - 1995

Land Rover Defender 1994 - 2002, Discovery I 1989 - 1998, Range Rover Classic 1986 - 1995

PF32K-1002

Weight: 4.01 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

PF32K-1002   Position diagram

The delivery time will be sent via e-mail
Note
1397)

1397)   Included within this pack are the following parts:PFF32-101 Panhard Rod BushPFF32-108 Front Radius Arm Front BushPFF32-109 Front Radius Arm Rear BushPFR32-110 A Frame to Chassis BushPFR32-111 Rear Radius Arm Front BushPFR32-112 Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available.

Powerflex Road Series
Exhaust Mount

Exhaust Mount

EXH019

Weight: 0.10 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 3

EXH019   Position diagram

The delivery time will be sent via e-mail
Powerflex Road Series
10 %
Rear Anti Roll Bar Link Bush

Rear Anti Roll Bar Link Bush

PF32-105

Weight: 0.11 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PF32-105   Position diagram 15

The delivery time will be sent via e-mail
Note
1448)

1448)   This part is designed to fit front or rear positions of the anti roll bar link.

Powerflex Road Series
10 %
Bump Stop Lowered - 40mm

Bump Stop Lowered - 40mm

PF32-130-40

Weight: 0.97 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-40   Position diagram 30

The delivery time will be sent via e-mail
Note
1445)

1445)   This part is 40mm in height; designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

Powerflex Road Series
10 %
Bump Stop Standard - 60mm

Bump Stop Standard - 60mm

PF32-130-60

Weight: 1.19 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-60   Position diagram 30

The delivery time will be sent via e-mail
Note
1446)

1446)   This part is 60mm in height; designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

Powerflex Black Series
Universal Exhaust Mount

Universal Exhaust Mount

EXH003

Weight: 0.06 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

EXH003   Position diagram

The delivery time will be sent via e-mail
Powerflex Road Series
10 %
Bump Stop Extended - 80mm

Bump Stop Extended - 80mm

PF32-130-80

Weight: 1.38 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-80   Position diagram 30

The delivery time will be sent via e-mail
Note
1447)

1447)   This part is 80mm in height; designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

Powerflex Road Series
10 %
Shock Absorber Bush

Shock Absorber Bush

PF32-132

Weight: 0.06 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PF32-132   Position diagram 32

The delivery time will be sent via e-mail
Note
1402)

1402)   PF32-132 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

Powerflex Road Series
Anti roll bar bush front

Anti roll bar bush front

PFF32-101

Weight: 0.16 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-101   Position diagram 1

The delivery time will be sent via e-mail
Note
1441)

1441)   This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301.

Powerflex Road Series
10 %
Front Anti Roll Bar Bush 25mm

Front Anti Roll Bar Bush 25mm

PFF32-103-25

Weight: 0.24 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-103-25   Position diagram 3

The delivery time will be sent via e-mail
Note
575)

575)   Please check anti roll bar diameter before ordering.

Powerflex Road Series
Front Radius Arm Front Bush Caster Offset - 25mm Lift

Front Radius Arm Front Bush Caster Offset - 25mm Lift

PFF32-108G25

Weight: 1.43 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-108G25   Position diagram 8

The delivery time will be sent via e-mail
Note
1411)

1411)   PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 25mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
Front Radius Arm Front Bush

Front Radius Arm Front Bush

PFF32-108

Weight: 0.80 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-108   Position diagram 8

The delivery time will be sent via e-mail
Note
1457)

1457)   This part suits vehicles with the wider 44mm radius arms. For vehicles with 38mm radius arms please use PFF32-107. PFF32-108 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
Front Anti Roll Bar Bush 28mm

Front Anti Roll Bar Bush 28mm

PFF32-103-28

Weight: 0.26 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-103-28   Position diagram 3

The delivery time will be sent via e-mail
Note
1444)

1444)   This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering.

Powerflex Road Series
Front Radius Arm Front Bush Caster Offset - 50mm Lift

Front Radius Arm Front Bush Caster Offset - 50mm Lift

PFF32-108G50

Weight: 1.43 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-108G50   Position diagram 8

The delivery time will be sent via e-mail
Note
1412)

1412)   PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 50mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
Front Radius Arm Rear Bush - Anti Pull

Front Radius Arm Rear Bush - Anti Pull

PFF32-109G

Weight: 0.71 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-109G   Position diagram 9

The delivery time will be sent via e-mail
Note
1414)

1414)   PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.

Powerflex Road Series
Steering Damper Bush - Pin End

Steering Damper Bush - Pin End

PFF32-136

Weight: 0.05 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

PFF32-136   Position diagram 36

The delivery time will be sent via e-mail
Note
1439)

1439)   This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135.

Powerflex Road Series
10 %
Rear Radius Arm Front Bush

Rear Radius Arm Front Bush

PFR32-111

Weight: 2.08 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-111   Position diagram 11

The delivery time will be sent via e-mail
Note
1386)

1386)   During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.

Powerflex Road Series
A Frame to Chassis Bush

A Frame to Chassis Bush

PFR32-110

Weight: 0.34 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-110   Position diagram 10

The delivery time will be sent via e-mail
Note
1422)

1422)   PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.A short video to help as a guide to remove bushes such as these can be found by clicking here.

Powerflex Road Series
10 %
Rear Anti Roll Bar Bush 19mm

Rear Anti Roll Bar Bush 19mm

PFR32-103-19

Weight: 0.27 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-103-19   Position diagram 13

The delivery time will be sent via e-mail
Note
575)

575)   Please check anti roll bar diameter before ordering.

Powerflex Road Series
10 %
Rear Trailing Arm To Axle Bush

Rear Trailing Arm To Axle Bush

PFR32-112

Weight: 0.28 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-112   Position diagram 12

The delivery time will be sent via e-mail
Note
1423)

1423)   PFR32-112 uses our Black 95A material which helps to increase the stiffness of the original parts by 25%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
Rear Shock Absorber Upper Bush

Rear Shock Absorber Upper Bush

PFR32-133

Weight: 0.27 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-133   Position diagram 33

The delivery time will be sent via e-mail
Note
1424)

1424)   PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

Powerflex Road Series
10 %
Shock Absorber Lower Bush

Shock Absorber Lower Bush

PFR32-134

Weight: 0.10 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-134   Position diagram 34

The delivery time will be sent via e-mail
Note
1425)

1425)   PFR32-134 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material

Partsoutlet24.com © 2014 – All rights reserved
Sta utilizzando una versione ormai obsoleta di Internet Explorer. Si consiglia di aggiornare il Browser per visualizzare correttamente il sito.