uses cookies to help you get the best possible service. If you continue to surfing the site, you agree to the cookie usage Accept

Front Radius Arm Rear Bush - Anti Pull

The delivery time will be sent via e-mail
Code
PFF32-109G
Weight
0.71 Kg

Description

Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.


Units for car 2

PFF32-109G   Position diagram 9

Supported models

Brand Model Version Note
Defender (1984 - 1993) Classic line - rinforzati 40% 1414)
Defender (1994 - 2002) Classic line - rinforzati 40% 1414)
Defender (2002 - 2016) Classic line - rinforzati 40% 1414)
Discovery 1 (1989-1998) Classic line - rinforzati 40% 1414)
Range Rover Classic (1970 - 1985) Classic line - rinforzati 40% 1414)
Range Rover Classic (1986-1995) Classic line - rinforzati 40% 1414)

1414)   PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.





You may also like


Categories


Powerflex Road Series
Exhaust Mount

Exhaust Mount

EXH019

Weight: 0.10 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 3

EXH019   Position diagram

The delivery time will be sent via e-mail
Powerflex Road Series
10 %
Front Anti Roll Bar Link Bush

Front Anti Roll Bar Link Bush

PF32-105

Weight: 0.11 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PF32-105   Position diagram 5

The delivery time will be sent via e-mail
Note
1448)

1448)   This part is designed to fit front or rear positions of the anti roll bar link.

Powerflex Road Series
10 %
Bump Stop Lowered - 40mm

Bump Stop Lowered - 40mm

PF32-130-40

Weight: 0.97 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-40   Position diagram 30

The delivery time will be sent via e-mail
Note
1445)

1445)   This part is 40mm in height; designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

Powerflex Road Series
10 %
Bump Stop Standard - 60mm

Bump Stop Standard - 60mm

PF32-130-60

Weight: 1.19 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-60   Position diagram 30

The delivery time will be sent via e-mail
Note
1446)

1446)   This part is 60mm in height; designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

Powerflex Road Series
10 %
Bump Stop Extended - 80mm

Bump Stop Extended - 80mm

PF32-130-80

Weight: 1.38 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PF32-130-80   Position diagram 30

The delivery time will be sent via e-mail
Note
1447)

1447)   This part is 80mm in height; designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

Powerflex Black Series
Universal Exhaust Mount

Universal Exhaust Mount

EXH003

Weight: 0.06 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

EXH003   Position diagram

The delivery time will be sent via e-mail
Powerflex Road Series
Exhaust Mount

Exhaust Mount

EXH003

Weight: 0.06 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

EXH003   Position diagram 19

The delivery time will be sent via e-mail
Powerflex Road Series
Powerflex Handling Pack

Powerflex Handling Pack

PF32K-1001

Weight: 4.01 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

PF32K-1001   Position diagram

The delivery time will be sent via e-mail
Note
1396)

1396)   Included within this pack are the following parts:PFF32-101 Panhard Rod BushPFF32-107 Front Radius Arm Front BushPFF32-109 Front Radius Arm Rear BushPFR32-110 A Frame to Chassis BushPFR32-111 Rear Radius Arm Front BushPFR32-112 Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available.

Powerflex Road Series
Anti roll bar bush front

Anti roll bar bush front

PFF32-101

Weight: 0.16 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-101   Position diagram 1

The delivery time will be sent via e-mail
Note
1441)

1441)   This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301.

Powerflex Road Series
10 %
Front Radius Arm Front Bush

Front Radius Arm Front Bush

PFF32-107

Weight: 0.82 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-107   Position diagram 7

The delivery time will be sent via e-mail
Note
1456)

1456)   This part suits vehicles with the narrower 38mm width radius arm. For vehicles with 44mm width radius arms please use PFF32-108. PFF32-107 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
10 %
Front Radius Arm Front Bush Caster Offset - 50mm Lift

Front Radius Arm Front Bush Caster Offset - 50mm Lift

PFF32-107G50

Weight: 1.13 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-107G50   Position diagram 7

The delivery time will be sent via e-mail
Note
1410)

1410)   PFF32-107G-50 has been engineered to provide caster correction for vehicles fitted with a 50mm lift kit. This part suits narrower 38mm arms fitted on models up to chassis number KA. PFF32-107G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 50mm. This part suits narrower 38mm arms fitted on models up to chassis number KA. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-107G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
10 %
Front Radius Arm Front Bush Caster Offset - 25mm Lift

Front Radius Arm Front Bush Caster Offset - 25mm Lift

PFF32-107G25

Weight: 1.13 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 4

PFF32-107G25   Position diagram 7

The delivery time will be sent via e-mail
Note
1409)

1409)   PFF32-107G-25 has been engineered to provide caster correction for vehicles fitted with a 25mm lift kit. This part suits narrower 38mm arms fitted on models up to chassis number KA. PFF32-107G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 25mm. This part suits narrower 38mm arms fitted on models up to chassis number KA. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-107G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Powerflex Road Series
10 %
Front Radius Arm Rear Bush

Front Radius Arm Rear Bush

PFF32-109

Weight: 0.50 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFF32-109   Position diagram 9

The delivery time will be sent via e-mail
Note
1413)

1413)   PFF32-109 replicates original steering geometry.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.To counter pull to the left or right, please use PFF32-109G05 for 0.5 degrees offset or PFF32-109G1 for 1 degree offset.

Powerflex Road Series
Steering Damper Bush - Pin End

Steering Damper Bush - Pin End

PFF32-136

Weight: 0.05 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 1

PFF32-136   Position diagram 36

The delivery time will be sent via e-mail
Note
1439)

1439)   This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135.

Powerflex Road Series
A Frame to Chassis Bush

A Frame to Chassis Bush

PFR32-110

Weight: 0.34 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-110   Position diagram 10

The delivery time will be sent via e-mail
Note
1422)

1422)   PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.A short video to help as a guide to remove bushes such as these can be found by clicking here.

Powerflex Road Series
10 %
Rear Radius Arm Front Bush

Rear Radius Arm Front Bush

PFR32-111

Weight: 2.08 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-111   Position diagram 11

The delivery time will be sent via e-mail
Note
1386)

1386)   During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.

Powerflex Road Series
10 %
Rear Trailing Arm To Axle Bush

Rear Trailing Arm To Axle Bush

PFR32-112

Weight: 0.28 kg;


Replacement performance suspension bushes, high temperature exhaust mounts, closed cell foam and PU bump stops.

Units for car 2

PFR32-112   Position diagram 12

The delivery time will be sent via e-mail
Note
1423)

1423)   PFR32-112 uses our Black 95A material which helps to increase the stiffness of the original parts by 25%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere.

Partsoutlet24.com © 2014 – All rights reserved
Sta utilizzando una versione ormai obsoleta di Internet Explorer. Si consiglia di aggiornare il Browser per visualizzare correttamente il sito.