Front Anti Roll Bar Bush 21mm
|Fiesta Mk7 ST (2013 - 2017)||Classic line - rinforzati 40%||575)|
|Fiesta MK8 ST 200 (2017 ->)||Classic line - rinforzati 40%||575)|
575) Please check anti roll bar diameter before ordering.
También te podría gustar
Peso: 0,11 kg;
2289) This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush.
Peso: 0,29 kg;
2285) Supplied as a Polyurethane bush and CNC machined bracket combination, the Yellow 70A and Purple 80A materials in PFF19-2222 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles. Testing during development to determine stiffness of each of our materials over the original rubber bush.
Peso: 0,29 kg;
2284) Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials used in PFF19-2222P makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved especially when using the launch control. Testing during the development to determine stiffness of each of our materials over the original rubber bush.
Peso: 0,07 kg;
2287) Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222.