Peso: 2,00 kg;
|Espesor Spacer||Agujeros Distancia entre ejes||Diámetro de centrado||Frontera||Cant. kit de tornillos||Nota|
S23 Not permitted for vehicles with steel wheels!
S9 When using wheelspacers xou have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without this cut-outs it is not possible to use the wheels or wheelspacers! Please check as follow: Dtud lengh (e.g. 25mm) minus spacerthickness (e.g. 15mm) = 10 mm exses lenght. So the cut out should have 11 mm depth to take the original stud. Further the cut-outshould have minimum 22 mm x 22 mm height/width to take theoverlaping nut. ATTENTION: when using 15 mm spacers at least 7 mmdeep cut-outs are needed as the nuts stand over the contact surface!
* TÜV Certificate